Quality Guidelines for Trading Cards (Single Cards)
When listing an item in the Used category, it is required to select a “Item condition” corresponding to its state and to upload pictures of the item.
Please select the condition level that is closest to the actual state of the item in your possession.
If the selected condition level does not match the actual condition of the item, we will confirm with the buyer at the time of authentication whether or not the transaction can continue.
Please note that, if the transaction is cancelled, we may return the item(s) by cash on delivery.
Precautions
・The condition list is only an example. Condition level standards may vary depending on the item.
・Product images on SNKRDUNK may appear different from actual color tone due to the photoshooting environment.
Item Condition Table (Normal cards)
*If the cards included in the set are of varying conditions, the seller needs to list them under the grade of the card with the lowest condition in the set.
e.g. ) If one of the five cards is in A condition, but the other four are in D, you need to list the set as D.
*The inspection and authentication requirements for PSA items and unopened cards (items enclosed in clear packaging) are different. Please check the bottom of this page for details.
Item Condition (Normal cards)
【A(開封直後同様の美品)】 Mint condition - brand new, no damages
Items that can be listed in the "A" category are limited to items that have been stored for collection purposes and are still in the same condition as they were immediately after being opened ("fresh out of the pack").
Minor cut marks that may occur during the manufacturing and distribution process and mild warping that can be confirmed from the time of primary distribution are considered to be part of an item’s initial manufacturing defects.
In addition, the following conditions are also considered to be initial manufacturing defects, and these will meet our guideline standards for condition “A” .
*Even if an item is in a condition that can be assessed as its initial manufacturing defects, if the existing defects are very prominent or are found in several areas, please list the item in the "B" category.
Extremely minor white chipping
Vertical and/or horizontal lines *In multiple areas
Holo chipping and holo misalignment that may occur during manufacturing process *In multiple areas
【B(小さなキズ/ソリがある品)】 Minor scratches or scuffs
Items that show minor chipping or scratches but are not noticeable at first sight will need to be listed as condition “B”.
The following conditions will meet our guideline standards for condition “B”, even if they are present in multiple areas.
*If the area where the defects are found is extensive, the item will need to be listed as condition “C”
Minor white chipping in multiple areas
Large, noticeable scratches from the manufacturing stage
Small, shallow, uneven scratches occurred after opening
Distortion that does not stand out when item is placed on a flat surface
Light corner creasing that can be seen only in one area
【C(中程度のキズ/ソリあり)】Moderate scratches or scuffs
Please choose the "C" category when an item presents chipping, scratches, cracking and similar defects that may occur in multiple areas when used during gameplay.
The following conditions will meet the guideline standards for condition “C”, even if they are present in multiple areas.
Extensive white chipping / fraying
Conspicuous unevenness, extensive scratching
Distortion noticeable at first sight
Light creasing
【D(大きなダメージあり)】Major damage
Please choose the "D" category for items that have heavy signs of wear on the entirety of their surface.
If the card presents discoloration caused by exposure to sunlight or if it presents any of the following conditions, it will meet our guideline standards for condition “D”, even if they are present in multiple areas.
However, if there are visible signs of writing etc. that detracts from the design of the card, if the card is inked, has heavy chipping, staining or tearing, has signs of trimming (cutting that is not an initial manufacturing defect), water damage, or food/beverage staining, this card cannot be listed even as condition “D”.
Highly noticeable denting / moderate scratching in multiple areas
Large creasing that affects the design of the item / Severe fraying
【Conditions outside of our guideline standards】
If the card has visible signs of food/beverage staining and writing on it that detracts from the card’s design, heavy chipping, damage, or if it presents any of the following conditions, it cannot be listed even as condition “D”.
Water damage
Heavy creases
Trimming (Cutting of the card that are not initial manufacturing defects)
Inked Cards
Item condition table (For items authenticated by third-party authentication companies)
Please select the condition of your item, based upon the scale in the following table.
Item condition (For items authenticated by third-party authentication companies)
For items that are contained inside a card holder that certifies it has been authenticated by third-party authentication companies (Including PSA), we will inspect and authenticate the item as is, still inside the card holder.
However, even if the item will be in its original state, please be assured that we will carefully authenticate the item focusing on the following:
・If the holder presents signs of opening;
・If the holder is damaged;
・If the holder is a counterfeit;
・If the card itself (inside the holder) is a counterfeit;
*The condition of the card itself (inside the holder) will not be checked regarding if it conforms to its PSA rank.
*About “Qualifier” grading, we authenticate based on PSA’s official “Additional Terms & Info”.
*Fixtures (e.g. bands and similar) used to conceal certification numbers or serial numbers are not included in the accessories.
*If the card is inside a clear plastic bag, this will be opened at the time of authentication and the card will be put in a replacement bag afterward depending on it’s condition.
【Inside Authentication Standards】
Minor scratches and air bubbles in the card holder are considered within our authentication standards, as they can occur during the manufacturing and distribution process.
Should there be large, noticeable scratches, or scratches over a wide area, please provide pictures of these and write the details in the additional information section.
We will confirm any details related to the card's condition listed in the additional information, or the comment sections.
*Should there be any discrepancies between the description of the item and the item's actual condition, we will confirm with the buyer to see if they would like to proceed with the transaction.
Air bubbles, dust or foreign particles inside the holder
Minor scratching on the holder
【Outside Authentication Standards】
Large scratches on the surface of the holder
Crackings on the holder
Damage and/or chipping on the holder
Item Condition (Unopened cards)
Cards that are distributed inside clear packaging, such as some promotional cards, can be listed by sellers even if they have not yet been removed from their original packaging.
If listed in said unopened condition, SNKRDUNK will authenticate the card assuming it to be in the range of initial defects by default, unless the item itself is bent or if it shows prominent damage.
Even if such items will be authenticated according to the above-mentioned assumptions, rest assured that we will carefully authenticate such items focusing on the following points:
・If there is any evidence of the clear packaging having been opened;
・If the clear packaging is damaged;
・Whether the clear packaging is counterfeit or not;
・Whether the card itself (inside the clear packaging) is counterfeit or not.
【Inside Authentication Standards】
Minor tear of the clear packaging
【Outside Authentication standards】
Extensive tearing of transparent pack
Crease of the card itself